ECU BOOT GLITCH DISCLAIMER
ECU Boot Glitch Disclaimer & Customer Acceptance of Risk
## Important – Please Read Before Authorising Work ##
ECU boot glitch, boot mode access, unlocking, bench programming, flashing and recovery procedures involve accessing and communicating directly with sensitive electronic control units.
These procedures carry an **inherent risk of ECU failure**, even where professional equipment, suitable power supplies and reasonable care and skill are used.
By instructing **MH Vehicle Diagnostics And Tuning Ltd** to carry out this work, the customer acknowledges and accepts these inherent risks.
## Customer Acceptance of ECU Failure Risk ##
The customer specifically acknowledges that during or following an ECU boot glitch, unlocking, programming, flashing or recovery procedure, an ECU may:
– Stop communicating.
– Fail to enter or exit programming/boot mode correctly.
– Become temporarily or permanently unresponsive.
– Lose or corrupt software, calibration, coding or security data.
– Require additional bench recovery or programming.
– Require cloning to another ECU.
– Become irrecoverable and require replacement.
– Cause the vehicle to become temporarily or permanently non-running until further repair or replacement is carried out.
**There is no guarantee that an ECU can be successfully unlocked, programmed, recovered or returned to its original operating condition.**
## Inherent Risk – Responsibility for ECU Replacement or Recovery ##
Where an ECU fails, becomes corrupted, becomes unresponsive or requires replacement **despite MH Vehicle Diagnostics And Tuning Ltd having carried out the agreed procedure with reasonable care and skill**, the customer accepts that this is an inherent risk of the procedure.
In those circumstances, **MH Vehicle Diagnostics And Tuning Ltd will not be responsible for the cost of replacing the ECU, repairing the ECU, cloning another ECU, manufacturer programming, vehicle recovery, transportation, storage, loss of use, alternative transport or other associated costs arising solely from that inherent failure.**
Any additional diagnostic, recovery, programming, cloning, repair or replacement work required following such an inherent failure will be chargeable to the customer unless otherwise agreed in writing.
## Pre-Existing or Latent ECU Faults ##
Electronic control units may contain faults that cannot reasonably be identified before programming begins.
These may include:
– Internal component deterioration.
– Flash memory or EEPROM failure.
– Processor faults.
– Previous unsuccessful programming.
– Previous tuning or unlocking.
– Poor-quality or corrupted software.
– Previous ECU repairs.
– Water or heat damage.
– Electrical or voltage damage.
– Previous third-party modifications.
– Communication faults.
– Latent hardware defects.
A boot glitch or programming procedure can expose an existing weakness that was not apparent beforehand.
MH Vehicle Diagnostics And Tuning Ltd cannot accept responsibility for failure caused by a pre-existing, latent or previously unidentified defect within the ECU, vehicle electronics or associated systems.
## Previous Tuning or Programming ##
The customer must disclose, where known, any previous:
– ECU remapping or tuning.
– ECU unlocking.
– Bench or boot programming.
– ECU cloning.
– Immobiliser modification.
– ECU repair.
– Manufacturer software update.
– Failed programming attempt.
MH Vehicle Diagnostics And Tuning Ltd cannot guarantee the integrity or recoverability of an ECU that has previously been modified, programmed, repaired or accessed by another party.
## Vehicle Electrical Condition ##
A stable electrical system is essential for ECU programming.
Where appropriate, professional battery-support equipment will be used. However, MH Vehicle Diagnostics And Tuning Ltd cannot accept responsibility for ECU or vehicle failure caused by pre-existing battery faults, wiring defects, charging-system problems, communication-network faults, defective control modules or other electrical problems outside our reasonable control.
## Recovery Is Not Guaranteed ##
If an ECU becomes unresponsive, MH Vehicle Diagnostics And Tuning Ltd may attempt recovery where reasonably practicable.
An attempt to recover an ECU does **not** constitute a guarantee that recovery will succeed.
Where additional recovery, cloning, programming, parts or replacement ECUs are required, these will be treated as additional work and may incur additional charges.
## Vehicle Downtime ##
The customer acknowledges that an unsuccessful programming or recovery procedure may result in the vehicle being unusable until the ECU is successfully recovered, repaired or replaced.
Where the loss of use results solely from an inherent ECU failure, latent defect or other circumstance outside the reasonable control of MH Vehicle Diagnostics And Tuning Ltd, the company will not be responsible for consequential costs including vehicle hire, alternative transport, missed work, business interruption or other associated losses.
## Customer Authorisation ##
By authorising the work, the customer confirms that:
– They own the vehicle or have the owner’s authority to authorise the work.
– They understand that ECU boot glitch and programming procedures involve inherent risks.
– They understand that an ECU may become permanently unusable through an inherent failure even when the procedure is correctly carried out.
– They accept the risk that additional recovery, repair, cloning or replacement may be required.
– They accept responsibility for additional costs arising solely from an inherent ECU failure, latent defect, previous modification or circumstance outside the reasonable control of MH Vehicle Diagnostics And Tuning Ltd.
– They have disclosed any known previous ECU programming, tuning, repairs or relevant faults.
## Limitation of Liability ##
To the fullest extent permitted by law, MH Vehicle Diagnostics And Tuning Ltd accepts no liability for loss or damage resulting solely from:
– The inherent risks associated with ECU boot glitch, unlocking, programming, flashing or recovery.
– Pre-existing or latent ECU defects.
– Previous ECU modifications, tuning, repairs or programming.
– Failure of ECU hardware or internal memory.
– Vehicle electrical or communication-system defects.
– Manufacturer or third-party software or hardware.
– Subsequent work, programming or modification undertaken by another party.
**Nothing in this disclaimer excludes or restricts liability where it would be unlawful to do so, including the customer’s statutory rights and MH Vehicle Diagnostics And Tuning Ltd’s obligation to perform its services with reasonable care and skill.**
## Acceptance ##
By proceeding with ECU boot glitch, unlocking, programming, flashing or recovery work, the customer confirms that they have read and understood this disclaimer and voluntarily accept the inherent risks associated with the procedure.
Where an ECU fails as a consequence of an inherent defect or inherent programming risk despite the procedure being carried out with reasonable care and skill, the customer agrees that the cost and risk of subsequent ECU recovery, repair or replacement rests with the customer.